There are two methods for opening the door by fingerprint.
1-Door opening with fingerprint door handle
Fingerprint reader, electronic lock and door handle 3 in one.It is battery-powered and does not require battery replacement up to an average of 1000 passes per device specifications.Alerting the last 100 passes before the battery runs out, informs you that the battery needs replacing.Even 10 fingers of a person can be introduced to the system. If one of the fingers deforms, one of the remaining 9 fingerprints can be switched.It is known that the fingerprint can be switched by scanning, and if desired, the proximity card, password and classical mechanical key can also be switched. If an average of 300 is desired, 500 fingerprints can be introduced to the fingerprint door handle.
2-Door opening with fingerprint reader device
The fingerprint reading terminal is installed in a convenient location near the door. An electronic or magnetic door lock is attached to the door and connected to the fingerprint reader. The fingerprints of the persons who are allowed to pass are introduced to the device. When the defined people read the fingerprint, thank you ”announcement is made with Turkish female voice and a trigger is sent to the door lock to open the door.Fingerprint devices are IP based and input-output reports can be received from the access control software connected to the network. There are fingerprint models in square or rectangular shapes depending on the shape of the door. You can examine the imported models, which vary according to registration capacity, fingerprint reading capacity, fingerprint sensor and recognition speeds.
